all back together ,,,,,, didn't get to take it out yet.
i put the big wheels on the front end, not a chance in hell of using the centramatics on the front with those massive calipers. once the spacer is off, the caliper is beyond the hub and it just barely fits behind the rims, i might have 3/32" clearance.
i never bothered tryin the tie rod flip on the driver side. and i still have to trim the rockers at the back edge, but it is what it is for now. gonna take some minor adjustments to dial things in but. i think this is what it looks like for awhile.
i already need to adjust the front pinion angle, i want a bit more castor, but the frame side upper jamb nut is a MFR to get to. i need to get a big crows foot for it. still need to wind the winch line correctly, get the cell cover on and spare in.
and i have some 16ga. aluminum left over i might fill or cap that center section on the rear end of the cage and then i can let the top run short and it won't matter, no need for my jimmy-rig patchwork.
so pics of front, back and side as it will be for now.
seats and restraints are in the works.