So, I’ve decided to go with a super 35 kit for my rear axles. I’ve done quite a bit of reading on here. Seen lots of advise from Jerry Bransford, Chris, and others.
I’ve decided to go with the revolution gear axles with the ARB locker, unless there is a better recommendation? From everything I’ve read, and everything I have been told here, the 1541H is hands down the best rear axle for the Dana 35 super due to grooving of the chromoly shafts. I’m choosing the ARB locker because I like the idea of selectable lockers, vs the auto locker set up in the rear. And ARB seems to have a great name in the industry. Also revolution offers the ARB locker in a kit they sell. I’m open to other suggestions as far as lockers go...
So my questions are: is the revolution gear axles (30 spline) made of 4340 chromoly or are they made with the 1541H?
Can I use my stock 3.73 ring and pinion with the locker? I plan on regearing to 4.88 in the future.
I’ve done a little research on amazon and eBay, even poked around on revolutions website, but can’t seem to find what material is used in the Dana 35 super kit from revolution. They offer a 10 year warranty on their axles, which seems to be great. But before I pull the trigger on this, I would like to know what I’m getting (it’s possibke the info is out there, and I just missed it). Any insite on this is greatly appreciated. Thanks!!
I’ve decided to go with the revolution gear axles with the ARB locker, unless there is a better recommendation? From everything I’ve read, and everything I have been told here, the 1541H is hands down the best rear axle for the Dana 35 super due to grooving of the chromoly shafts. I’m choosing the ARB locker because I like the idea of selectable lockers, vs the auto locker set up in the rear. And ARB seems to have a great name in the industry. Also revolution offers the ARB locker in a kit they sell. I’m open to other suggestions as far as lockers go...
So my questions are: is the revolution gear axles (30 spline) made of 4340 chromoly or are they made with the 1541H?
Can I use my stock 3.73 ring and pinion with the locker? I plan on regearing to 4.88 in the future.
I’ve done a little research on amazon and eBay, even poked around on revolutions website, but can’t seem to find what material is used in the Dana 35 super kit from revolution. They offer a 10 year warranty on their axles, which seems to be great. But before I pull the trigger on this, I would like to know what I’m getting (it’s possibke the info is out there, and I just missed it). Any insite on this is greatly appreciated. Thanks!!