Black Magic Brakesmust be AR day i just beat mine in today, that was the easy part. i need axle mounts, now.
yours sure don"t look stock where'd you pick those up from?
35x12.5r15315/75r16 MT/Rs or 35x12.5r15 MT/R?
Black Magic Brakes
nice , TY. do you know if those can be mig'd or do you need special rod to weld on the C's?
are the ramps buggin ya? to much might result in a balancing nightmare. widening the narrow grooves to create better transfer channels could be just enough. widen the skinny cracks. the ramps might be what keeps it quiet on pavement. that thing come with a depth gauge/guide?
You can move that part of the fender back. What you have to do to the inner fender braces to do so is tedious at best. At that point, just get some high line fenders.Not sure, when, if or how. But if I were to open up the rear wall, this is what needs to be moved out of the way. The outside corner needs to be pushed back about 1.5". This should also be enough to allow the larger MTR to clear at full stuff, full lock.
View attachment 153963
That would leave the back rear of the upper spring seat as the remaining point of interference.
Steel forging. Just weld.nice , TY. do you know if those can be mig'd or do you need special rod to weld on the C's?
tossin a dart at the board here............if your gonna cut into the fenders.....toximus had the GR high line inner mounting kit for sale.
i wonder if you could use the mounts. that'll give you platform to raise the battery and move your rear wall back.
as far as the rear wall cut it out and form some aluminum sheeting and rivet the seam into whats left of the OE inner.
What are you going to mount the inner fender to?Similar to this, I have always been curious if anyone has ran the Chris Durham hood with aftermarket inner highline fenders. This should eliminate the factory inner fender interference and allow the rear of the fender to be modified. I have always liked the CD hood but do not like how clearance is made but not made in other aspects.
Not quite sure. I have never studied it enough. I do remember seeing the TJ Chris Durham had, from the photos it looks as if he is running the hood with aluminum inners. It does not have that factory inner fender horizontal lip at the hood line. Not sure if the rear of the fender is still an issue with up travel as @jjvw is finding.What are you going to mount the inner fender to?