Front brake hose orientation

Sean B

TJ Enthusiast
Original poster
Supporting Member
Joined
Aug 15, 2023
Messages
142
Location
Winsted Connecticut
I feel silly posting this but I’m installing new hoses while doing my big brake install. It does not look right to me as it’s hitting the shock mount area of the front axel but I believe it is right. I’m using the doorman extended hoses and my previous ones were some beat up braided so I don’t have the OEM routing to compare to. Just want to make sure orientation at banjo bolt is correct. Posted a couple pictures, thanks in advance.

IMG_4320.webp


IMG_4319.webp
 
I don't know about the BBK. On the OEM the hose exits the caliper to the rear for a few inches before it goes sideways toward the frame.

1775240793155.webp


Perhaps you need to tilt your hose straighter down at the frame to bring the crossways section back a little?
 
I don't know about the BBK. On the OEM the hose exits the caliper to the rear for a few inches before it goes sideways toward the frame.

View attachment 680743

Perhaps you need to tilt your hose straighter down at the frame to bring the crossways section back a little?

Thanks, I unfortunately didn’t have the stock ones to compare to.