Today was relatively successful, finished welds on the front truss and rear cradle, and got a coat of steelit over the welds. also got the rear lower control arm mounts welded up.
After that I messed with trying to get my lower balljoints in and gave up on that pretty quick, and moved the axles to their rough position under the jeep.
Was really just killing time till my rear main seal showed up, cleaning up the shop a bit and getting an idea of axle position.
Got the rear main seal and oil pan gasket replaced, honestly it woulda only taken an hour or so if it wasn’t for all the crusty bits on the edge that had to be scraped off, but turned out alright, should seal up good.
After that I messed with trying to get my lower balljoints in and gave up on that pretty quick, and moved the axles to their rough position under the jeep.
Was really just killing time till my rear main seal showed up, cleaning up the shop a bit and getting an idea of axle position.
Got the rear main seal and oil pan gasket replaced, honestly it woulda only taken an hour or so if it wasn’t for all the crusty bits on the edge that had to be scraped off, but turned out alright, should seal up good.
