since the dawn of time, man has pursued how to go faster, even with a tractor motor....
05 exhaust diameter questions
- Thread starter twmattox
- Start date
since the dawn of time, man has pursued how to go faster, even with a tractor motor....
View attachment 411167
I think most folks would be hard pressed to "feel" the difference. I used to spray a 35 shot on a bracket car years back. You could barely feel the difference when the nitrous hit. 10 or 20hp would probably be invisible to most butt dynos.
2.5 " Why start out limiting potential ? If you had a V-10 , ( 488 c.i.d.) Dodge pickup would you put 2.25 dual exhaust on it ?
However , if you believe that you "NEED BACKPRESSURE " to run right why not go with a 1" system for that locomotive type torque.
I've got dual 3" front to back on my 505 cubic inch Dodge pickup.
But the TJ has a 2.25" on it lol. To be honest I don't know how I ended up at 2.25" though, that exhaust has gone through so many iterations it's probably just what I had laying around
KennethS
TJ Expert
Yep. Butt dyno may be mostly placebo (you feel what you expect to). Interestingly, I was talking to a tuner today who said he has repeatedly seen increase in torque from 1500 RPM on up with open headers vs any exhaust
Yep. Butt dyno may be mostly placebo (you feel what you expect to). Interestingly, I was talking to a tuner today who said he has repeatedly seen increase in torque from 1500 RPM on up with open headers vs any exhaust
And there are those who swear open headers make less power than full tunes exhaust ā¦
Of course open headers make less horsepower , not enough back pressure ! That's why Top Fuel Dragster always run a full exhaust system with cats and mufflers
Anyone here follow the engine master series and there dyno comparisons- Cant find the episode where they did open headers, 14" extensions, vs exhaust. But if memory serves a tuned extension to the header gets best results allows best scavenging with least back pressure-
https://www.motortrend.com/news/eng...-the-backpressure-myth-3-vs-2-5-inch-exhaust/
https://www.motortrend.com/news/eng...-the-backpressure-myth-3-vs-2-5-inch-exhaust/
I was thinking they also did one comparing exhaust tubing sizes; and IIRC, it didn't matter much.
Another datapoint the 4.9L straight 6 Ford tractor motor typically sees 3ā exhaust piping as a āperformanceā upgrade. And they āfeelā lazier than our motors ā¦ Iād say a 4.0 feels peppy compared to a 4.9 Ford ā¦ but Ford folks swear by them
Season 5 episode 16 was The one I was thinking of but The 2.5 vs 3ā I found on YouTube. Higher rpmās max HP is going to like bigger pipe- of course they are running higher HP stuff but engine Dyno is picking up at 3000 rpm up so leaves room for some speculation what is happening belowā¦
Similar threads
