My friend and I began putting a Zone 4 inch lift on my Jeep TJ today. We spent the day cutting bolts and trying to get stubborn nuts off. Using the instructions that zone provided for me I removed my control arms and began trying to remove the old springs and install the new ones. Well I guess the axle shifted when we removed the driver side control arm. We managed to get both front springs on but my axle is way out of alignment and the control arm mounts are no where near where they should be, I managed to get the wheels back on so the vehicle can sit on its own weight and maybe straighten it out but still not even close. The front pumpkin is tilted forward dramatically, and the whole axle is shifted horribly. I'm not sure where to go from here or what to do. I know you guys know what you're talking about any any advice would be greatly appreciated.