Ok finally hooked up my York mini on board air kit by Off Road Only. The kit is pretty complete with decent instructions but I’ll walk through it here for those who are interested in what the kit includes.
First remove your belt, airbox, and alternator.
View attachment 234608then remove your belt tensioner from the alternator bracket
View attachment 234609Next remove your alternator bracket.
View attachment 234610then attach the belt tensioner to the supplied bracket from the kit.
View attachment 234612then attach the bracket to the engine with the supplied hardware. The final bottom bolt that was supplied was to short so I had to get a longer one. This seems to be a common issue. One the bracket is attached you test fit the alternator to make sure the block fits in the alternator fork.
View attachment 234613once your check the alternator fitment you remove it and install the York.
View attachment 234614then install the alternator
View attachment 234615after the alternator is attached is the supplied idler pulley, I used the smaller of the two they supply, then route your belt.
next is your bracket with the manifold, pressure switch, and quick connector. I didn’t want my rocker switch in the jeep so I drilled a hole in the bracket and mounted the rocker switch to the bracket.
View attachment 234617View attachment 234618now all that is left to do is plumb your lines, reattach your alternator wiring and wire up the supplied wire harness for the York. Overall a relatively simple project.
View attachment 234622View attachment 234623View attachment 234624View attachment 234625Now I finally have my own air supply!
Thanks for the help
@Sancho and
@Alex01