transfer case

I have an 02 Wrangler 2.5L named Jenny. Jenny is stock with not much more done to her except having had her driver's seat swapped with a a Ford Ranger's bench. In the future, the dream for Jenny is to have her turned hybrid w/ a 100kv brushless motor attached somewhere to the drive train so...

So I ran into a issue where my jeep (1998 Tj) would not engage 4wd in a slightly problematic situation. I was trying to tow jetskis offroad on a uphill. To make a long story short, the jeep didn't engage 4wd. The shifter seems to be able to go through all the positions fine, (2H,4H,N,4L) but...

I've got a 97 Wrangler with a 4.0L in it, and haven't had to many issues, but the guy who owned it before me definitely ran it rough. Had a few pieces cracked and the frame certainly has been through a lot, but overall it's been a pretty reliable car. Until recently. I noticed after driving...

Any written instructions or videos that anyone recommends?

Found adjustment bolt, loosened and slid all the way out but grinding when going from 4H to 4L. What am I doing wrong? Instructions say to be in 4L when doing the adjustment. Doesn’t seem like I can slide it out any farther. Photo posted. The clean metal part is where it was.

For sale is a brand new Advance Adapters input shaft for Atlas ll 2-speed. Has 0 miles on it. Input shaft is 21 spline. Came off of brand new atlas manufactured 12/2020. In like new condition. Do not need as I had to convert to a different input shaft for my application. $100 obo

Hello All, I'm trying to discern the location of a leak between tranny and transfer case. Based on fluid level, I'm pretty sure the issue is the transfer case. Thinking of adding dye to help confirm and pinpoint the issue, but want to make sure before I go and make a potentially simple seal...

Hi all, I’m hoping I can get some feedback on an issue I’ve been dealing with for some years now. I’ve searched endlessly on all Jeep forums and nothing quite matched my issue. My build: 2001 Jeep TJ AUTO 4.0 4” lift Stock Dana 30 (front) Dana 35 (rear) The issue I’ve been having is every...

Hey guys, need some help with my 05 unlimited rubicon. Well, it’s kind of a rubicon. I got a good price for it because the owner before had changed the axles to standard lj axles. I thought the price was good and it would be a fun project to remake it into a rubicon I guess. Anyways, I recently...

Hey guys. I've got an 06 TJ with the 2.4 and 6 speed. I'm trying to find out what transfer case will fit on the end of my transmission. My current transfer case has a nasty leak out if the tail housing, there's play in the output shaft to the rear wheels, and you can hear something in there...

Anyone have a 2005 version of the 241 transfer case?

Hey Guys, I rebuilt my NP231 a while ago and ever since I rebuilt it it's been VERY difficult to change modes on the transfer case. I have a cable shifter on it now and even still it's not a smooth transition between different ranges. I know on my doubler there is a spring and ball that I can...

Hi All, I am hopping for some advice, especially now when a lot of places are closed. My jeep tj started leaking something a couple of wks ago. At first it was just a little bit but now it is a lot. I put cardboard under it and the leak is about one foot by one foot is size. Due to the virus...

Good morning all, I haven't been able to shift into 4WD since I acquired the Jeep back in September. This is my first 4WD vehicle, so I'm not one that can "feel" when it is or is not engaged. Also, the dash light is not working (I replaced the bulb and ran the test to confirm). Recently, I've...

I have a 2006 LJ and I'm bout to put on a 4 inch suspension lift with 33's. The lift kit recommends a SYE and a CV driveshaft. Would I be able to just use a transfer case drop kit instead? This is the lift kit I'm looking at...

Hello everyone, I just bought my first jeep a few weeks ago and i have noticed a loud growling/whining sound coming from under the Jeep when I give it gas while at higher speeds. It’s a 2004 wrangler sport with the Dana 44 rear end. Has a 6” lift with the drop bracket for the transfer case. I...

Theres this big ol dang metal disc on the outside of my output shaft, past the dreaded dust cover. Not sure what it is or what the name is, but can't get the dang thing off. Before I cause substantial damage trying to get this thing off, does anybody have a clue how to... or even what its...

Today I was changing a transfer case oil I didn't want to remove the skid plate, while I was planning my game plan, I came up with some idea. Cut the empty bottle in half taped a silicone tubing to it and placed it underneath the drain plug. See attached pictures. Still spilled a little bit...

So I'm New to this whole forum thing but I was told that I could get help with issues that I have with my jeep, so here it goes... So I have a 2006 stock LJ Rubicon, and I was driving up my driveway and i shifted into 4HI and shortly after, I put it in neutral and attempted to shift into 4LO...

So I am spending some tie in Colorado and was in 4 low for some time just putting along the trails.. I started going down Imogene trail and my 4 low in 1st isn’t slowing me down at all. It’s making a free spinning noise. Reverse is the same in 4 low, just free spinning. 2nd gear in 4 low seems...