This was the biggest bend I've seen come out of our group.I guess better to bend than destroy the knuckles with the savvy aluminum bar as blaine warns. But if one person was to test out the savvy bar @tworley is the guy.
This was the biggest bend I've seen come out of our group.I guess better to bend than destroy the knuckles with the savvy aluminum bar as blaine warns. But if one person was to test out the savvy bar @tworley is the guy.
I'm sure the fact that it's been bent multiple times isn't helping.This was the biggest bend I've seen come out of our group.
You mean krewThis was the biggest bend I've seen come out of our group.
Just step on up to the 6.7 diesel. 3.55 and you can set the cruise on 75 up the IKE and it won’t drop out of 10th, unless someone else slows you down.A few more photos
View attachment 271078View attachment 271079View attachment 271080View attachment 271081View attachment 271084View attachment 271085View attachment 271086View attachment 271087View attachment 271088View attachment 271089View attachment 271090View attachment 271091View attachment 271092
The truck did OK. It has 3.55 gears and could use a bit deeper gearing on these CO passes. The transmission temp spiked to 236 for a second before dropping. I pulled Loveland pass in 3rd and it was around 222. From my research, although high, it's still in the safe operating range.
On that climb there will always be one 18 wheeler doing 37 mph, passing another 18 wheeler doing 36.5 mph. always.Just step on up to the 6.7 diesel. 3.55 and you can set the cruise on 75 up the IKE and it won’t drop out of 10th, unless someone else slows you down.
U-haul?
i want something short like that trailer, i don't need 20ft, 14ft would be sufficient.
haven't touched that skeleton i picked up yet.
Just step on up to the 6.7 diesel. 3.55 and you can set the cruise on 75 up the IKE and it won’t drop out of 10th, unless someone else slows you down.
Must be those crazy flexy metalcoak control arms
Haha, I had a draft hailing MC and sat here debating for 15 minutes…Must be those crazy flexy metalcoak control arms
But that axle wrapMust be those crazy flexy metalcoak control arms
They aren't slowing him down too much. That's all I'll say.Haha, I had a draft hailing MC and sat here debating for 15 minutes…
too soon bro.
Can we finally shout “Trailer queen”, after his years of daily driving a rock crawler?They aren't slowing him down too much. That's all I'll say.
Totally off topic, but such a good full circle: https://nypost.com/2021/08/13/south-park-creators-matt-stone-trey-parker-buy-casa-bonita-restaurant/
I'll be making the 10-11 hour drive to Denver when it's open!Totally off topic, but such a good full circle: https://nypost.com/2021/08/13/south-park-creators-matt-stone-trey-parker-buy-casa-bonita-restaurant/