help

Hey just wanted to get everyones opinion. I'll be driving from Alaska to Nevade and wanted to know what parts everyone would bring and what they would do to the jeep before they left. Any advice would be great thank you in advance

I’ll try to keep this light, pictures will be uploaded tomorrow during day light. Thank you in advance. I have a 2006 rubicon with the 4.0 inline 6 and a 6 speed manual. It only has 83k mileage. A couple months back, mistakes were made and I came a little too hot into a turn and made the...

Can anyone help me with which wires go to which? Diagram and color coding attached.

Hello Everyone! I need help diagnosing this noise that I hear when accelerating after 30 MPH. i made a voice note of the noise it is attached to this thread. in order to hear this noise i put my phone below the steering wheel towards the fire wall. no check engine light, jeep runs great, no...

I really want these headlights for my lj

Hey guys, I have a 2001 jeep tj 2.5l and am having some issues with my turn signals. A while back I replaced my headlights with led headlights but im still using the stock turn signals. Not to long ago my left turn signal stopped working properly. It was hyper flashing and only in the front. The...

Greetings! BLUF: Can turn left 2 full rotations of steering wheel. Can only turn right 1 rotation of steering wheel. I have a 2006 TJ with a 6" lift and 37" tires. I have recently replaced the tie rod ends and drag link. However, I now have an issue with my turn radius. I can turn to the left...

I have a 2000 TJ and I just put new LED brake lights on it. I got them from amazon. Wired them all up. I got running lights working. Reverse lights working. The ground is fine I checked it multiple times. But my brake lights aren’t working and my turn signal is hyper flashing. So I install the...

Vehicle: 2006 TJ 4.0L L6 Scenario: I am replacing the tie rod, tie rod ends, drag link, and steering damper on my 2006 TJ. This is a vehicle I purchased form somebody else, and I have no data on what equipment is currently equipped on it. However, the steering damper has 2 hoses running from it...

So the other day after driving to work I went to add more washer fluid to my reservoir. After opening my hood I noticed that my entire AC line was frozen white. At the time I just assumed I was low on Freon. The next day however after inspecting further I noticed that as soon as my vehicle...

What did I do wrong? 3 days ago I replaced me rear axle seal and bearing. Last night as I was pulling into a parking spot at work my axle came undone. The retainer plate basically pulled off everything that was pressed on my axle. Left it all in the tube. I pressed everything on the correct...

I am trying to drop my fuel tank to replace the skid, do some frame painting, etc. on my '97 TJ. The nuts all came off after some resistance, but when disconnecting the fuel tank lines, how in the world do I disconnect the evap line? (I think it's that, it's not the fuel or the electric). There...

Hi there everyone, first post so be gentle. I just bought a red '02 TJ after a few years of poking around looking for the right one and trying to figure out whether I wanted an XJ or a TJ more. Needless to say I'm smitten and already looking to start building. The previous owner (number 3 and...

Hello all, Absolutely hate that I have to make this post asking for suggestions on my Jeep. Bought it about 2 years ago, Jeep LJ 160k 4.0 automatic. Runs great and drives pretty well. There’s a shitty lift kit that I’m planning on upgrading at some point as well as plenty of other stuff...

I have 2005 tj 4.0 auto keep getting codes p0339 & p0300 I have changed the camshaft and crankshaft sensor, full service change of plugs & oils etc, injector clean and currently have a ignition capacitor on order hoping that would be the weak link. it runs smooth when start up and idling...

Hello all. I got a pair of low profile rock sliders or body guards. I couldn't find an instal video or thread for these particular ones. So my main question is about drilling the holes for the part of the guards that wraps underneath the body. Im attaching some pictures of where the holes are...

So I have a 1998 Jeep wrangler Tj (170,000 miles), and I'm running into a issue after I bought it used. When I got back home, started it up and drove down the road the next morning, there was a higher pitched whine coming from what is sounds like the front end at 35-40mph and above. The pitch...

I have a 1999 Jeep Wrangler 4.0L. When I first purchased the vehicle over a year ago I had replaced all the exhaust on the car. I had replaced the exhaust manifold with the Banks exhaust manifold type version. It wasn't by Banks but an exact design. Then earlier this year it cracked and I had to...

I have an automatic '97 wrangler TJ (chevy swap) with an aftermarket Lokar shifter. The shifter has been finkiy since I've inherited the car. Sometimes when it's in park I'd have to tug on it til I heard a click in order to start the car. After admittedly tugging on it now the car is stuck in...

Hi all, thank you very much with helping me figure out my front steering components the other day, it was greatly appreciated. With that said, I need help figuring out what I need to replace for an appropriate 2 1/2 inch lift, from my current 4 inch lift. I ideally would like to run 31's and...