SOLD Dave Kishpaugh Geometry Relocation Brackets NEW

[HornedToad]

Price

150

Location

Davis, CA

These brackets restore the rear control arm geometry close to factory when used with a 2.5 - 4 inch short arm lift setup. I have been extremely excited to install them but I am just not going to have the time for a while and I need to clean up my increasingly growing stockpile of Jeep parts. These require a decent amount of fabrication as well as re-drilling both the frame and axle lower control arm mounts. You can read more about them here:

https://wranglertjforum.com/threads...-correction-brackets-are-now-available.43364/
I’m sure if you pm’d Dave Kishpaugh he can walk you through the install process. I’m asking less than what I paid and shipping is on me.

 

[psrivats]

@Pressurized, @Chris mentioned you were looking for a set?

 

[pc1p]

If Pressurized doesn't need them, let me know!

 

[Pressurized]

If Pressurized doesn't need them, let me know!

I ordered and paid for a set in January... I'm going to call Dave tomorrow and find out if mine did indeed ship. I need them by Tuesday. Jeep is supposed to go under the knife on Wednesday. Hopefully I'll know more in the morning...

 

[Pressurized]

If Pressurized doesn't need them, let me know!

Dave is supposed to be sending mine out today, shipping overnight... I should be good. Thanks for thinking of me.

 

[Pressurized]

If Pressurized doesn't need them, let me know!

I have a tracking number, mine are on the way.

 

[Vasq]

Are these still available?

 

[Pressurized]

Extremely pleased with the changes... Very noticeable. This mod is a big deal. If you aren't going to spend for a mid arm, do this for sure.

So here’s the list of benefits of doing both rear geo correction and spring pad relocation together…

1. Instant Center correction – improves traction eliminates wheel hop
2. Flattened links – drastically reduces rear steer
3. Flattened links – eliminates tire and tub interference due to wheelbase change
4. Flattened links – improves ride quality
5. Raised Track Bar mount - Significantly reduced body roll with higher roll center
6. Big increase in clearance for the rear track bar
7. No more spring bow
8. Perfect bump stop alignment
9. Rear Shock clearance

About 5-6 hours to install.