ranger101
TJ Addict
Measure the control arms from bolt to bolt. You can also verify it by measuring from hub to hub. Having all 4 tires off makes that a little easier.
Body lift done. Will start motor mount lift tomorrow.
Garage is getting pretty empty with (almost) everything installed
Read the second part about the MML and doing the driver side first. I learned this lesson the hard way.
Post in thread '2005 Rubicon; A Rubi Brother'
https://wranglertjforum.com/threads/2005-rubicon-a-rubi-brother.55498/post-977107
how do I rebuild this? It’s the diff side of Currie front trac bar. Do I just pull the black rubber off and then press out with Johnny joint tool?
View attachment 383845
Got my savvy transfer case shift cable installed. It needs some adjustment but Ill iron that out this weekend.
Surgery for my busted ACL got pushed til end of month, so I am buying a tow rig Saturday and will be back onto the Jeep projects after (for another 2 weeks).
Ill probably get to refreshing all the ujoints in driveline this weekend
Good luck with the surgery.
Whatcha gittin‘ for a tow rig?
Still need to square up axles and set pinion angles but finally got savvy shift cable dialed in.
Drove Jeep around neighborhood and snap ring on brand new Currie front trac bar popped out. So will be fixing that today and working on squaring everything up
View attachment 411896
Still need to square up axles and set pinion angles but finally got savvy shift cable dialed in.
Drove Jeep around neighborhood and snap ring on brand new Currie front trac bar popped out. So will be fixing that today and working on squaring everything up
I need locker recommendations. I have LP Dana 30/Dana 44 with 3.73 carriers. Intending on installing 5.13s (myself)
I originally thought elockers but from my reading it appears there is no drop in Dana 44 option?